Pacific Paint (Boysen) Philippines, Inc., - Specialty Water Based Coatings

BOYSEN^® Cool Shades™

BOYSEN^® Cool Shades™

DESCRIPTION: BOYSEN^® Cool Shades™ is a water-based, low- VOC paint designed with highly engineered infrared-reflecting (IR) pigments making it possible to create elegant shades of roof coating while reducing heat build-up on painted surfaces. Its 100% acrylic binder provides excellent dirt pick-up resistance and preserves heat-reflective properties over time.

PRINCIPAL USES: Roof coating that provides cooling effect and energy savings for any kind of properly primed roofing material.

FEATURES:
Compared to conventional roof coatings, a paint film containing IR pigments like BOYSEN^®Cool Shades™ will stay cooler because it repels infrared light before it can turn into heat.

Because the ability of the IR pigments to reflect infrared light is affected by how long the paint film stays clean, BOYSEN^®Cool Shades™ is also formulated to be dirt pick-up resistant with its all-acrylic technology, which also makes the paint film extremely durable.

SERVICE CONDITIONS: Ideally used with BOYSEN^®Primeguard™ White B-4301 as primer for new galvanized iron sheets, aluminum, or stainless steel.

FINISH: Gloss

DRY TIME:
Touch: 1 hour
Recoat: 2 hours

THEORETICAL COVERAGE PER 4-LITERS: 30 - 35 sq.m.
*Depending on surface texture and porosity

TINTING: All colors should be factory-mixed

THINNING SOLVENT: Use as supplied. If necessary, thin with not more than ½ Liter of clean water per 4-Liter can.

CLEAN-UP SOLVENT: Water

PACKAGING: 4-Liters

APPLICATION: By brush, roller, or airless spray

AVAILABLE COLORS:
B-8500 Reflecting White
B-8501 Shady Gray
B-8520 Radiant Beige
B-8547 Polarize Blue
B-8550 Spring Green
B-8573 Vibrant Terra Cotta
B-8580 Zen Brown

PRINCIPAL USES: Roof coating that provides cooling effect and energy savings for any kind of properly primed roofing material.

SERVICE CONDITIONS: Ideally used with BOYSEN^®Primeguard™ White B-4301 as primer for new galvanized iron sheets, aluminum, or stainless steel.

FINISH: Gloss

DRY TIME:
Touch: 1 hour
Recoat: 2 hours

THEORETICAL COVERAGE PER 4-LITERS: 30 - 35 sq.m.
*Depending on surface texture and porosity

TINTING: All colors should be factory-mixed

THINNING SOLVENT: Use as supplied. If necessary, thin with not more than ½ Liter of clean water per 4-Liter can.

CLEAN-UP SOLVENT: Water

PACKAGING: 4-Liters

SURFACE PREPARATION:
Wipe the surface with a rag soaked in paint thinner to remove grease, oil, wax and other foreign matter. For new galvanized surfaces, etch the surface by applying 10% BOYSEN^® Metal Etching Solution B-71 (Dilute 1 part of B-71 to 9 parts water). Rinse with water and dry immediately.

Unpainted galvanized surfaces that have been exposed for 6 months or more need not be etched.

For recoating pre-painted galvanized surfaces in good condition, sand lightly then wipe the surface with a clean rag before applying paint. Remove all loose paint film to sound surface. Spot prime bare substrate.

For corroded galvanized surfaces, remove rust by wire brushing and use BOYSEN^® Metal Etching Solution B- 71. Let it stay for 10 - 15 minutes. Be sure to remove all remaining residue. Immediately prime after drying.

For unglazed roof tiles, clean surfaces to be painted to remove dirt, dust, grease, oil, and other contaminants.

PAINTING SCHEDULE:
New Painting
Primer: BOYSEN^® Primeguard™ B-4301
Topcoat: BOYSEN^® Cool Shades™ (2 coats) (in any desired color)

Repainting
Apply primer if bare substrate becomes exposed during surface preparation. Finish with at least 2 coats of BOYSEN^® Cool Shades™ (in any desired color) over existing paint that is in good condition.