|
DESCRIPTION: BOYSEN® Acrytex™ Clear Coat is an acrylic solvent-based coating that has excellent adhesion, long-term durability, and easy clean-up characteristics.
PRINCIPAL USES: As a clear coat protection for bricks, natural stone, masonry and wooden surfaces
SERVICE CONDITIONS: Acrytex™ Clear Coat can only be applied onto bare substrates or surfaces painted with Acrytex™ products.
FINISH: Gloss
DRY TIME:
Touch: 30 minutes
Recoat: 2 hours
THEORETICAL COVERAGE PER 4-LITERS: 25 - 30 sq. m.
*Depending on surface texture and porosity
TINTING: Not applicable
THINNING SOLVENT:
BOYSEN® Acrytex™ Reducer B-1750
*If using brush or roller, use approximately 1-Liter of Acrytex™ Reducer B-1750 per 4-Liter of Acrytex™ paint.
CLEAN-UP SOLVENT:
BOYSEN® Acrytex™ Reducer B-1750
PACKAGING: 4-Liters
APPLICATION: By brush, roller or spray
|
|
DESCRIPTION: BOYSEN® Acrytex™ Clear Coat is an acrylic solvent-based coating that has excellent adhesion, long-term durability, and easy clean-up characteristics.
PRINCIPAL USES: As a clear coat protection for bricks, natural stone, masonry and wooden surfaces
SERVICE CONDITIONS: Acrytex™ Clear Coat can only be applied onto bare substrates or surfaces painted with Acrytex™ products.
FINISH: Gloss
DRY TIME:
Touch: 30 minutes
Recoat: 2 hours
THEORETICAL COVERAGE PER 4-LITERS: 25 - 30 sq. m.
*Depending on surface texture and porosity
TINTING: Not applicable
THINNING SOLVENT:
BOYSEN® Acrytex™ Reducer B-1750
*If using brush or roller, use approximately 1-Liter of Acrytex™ Reducer B-1750 per 4-Liter of Acrytex™ paint.
CLEAN-UP SOLVENT:
BOYSEN® Acrytex™ Reducer B-1750
PACKAGING: 4-Liters
APPLICATION: By brush, roller or spray
|
|
SURFACE PREPARATION:
New Concrete
Allow new concrete to dry for 14-28 days under normal weather conditions before painting. Surface to be painted should be clean and dry, free from oil, grease, dust, dirt, contaminants, and all loose grit and mortar.
Wooden Surfaces
Surface to be painted should be clean and dry, free from dust, dirt, and other foreign matter. Hammer all nails deep enough to apply putty. Sand rough wood until smooth and then dust off before painting.
PAINTING SCHEDULE:
Apply 2 - 3 coats of BOYSEN® Acrytex™ Clear Coat B-1700 by spray or brush.
|
