|
DESCRIPTION: BOYSEN® Red Oxide Metal Primer is an alkyd-based, rust inhibiting primer for steel and iron surfaces. It works exceptionally well for industries where there is an immediate need to prolong the life of metal products.
PRINCIPAL USES: As primer for exterior and interior steel.
DRY TIME:
Touch: 2 hours
Recoat: 12 hours
THEORETICAL COVERAGE PER 4-LITERS: 25 - 30 sq. m.
*Depending on surface texture and porosity
TINTING: Not applicable
THINNING SOLVENT: Thin with not more than 1- Liter of BOYSEN® Paint Thinner B-0340 per 4- Liter can of BOYSEN® alkyd enamel products.
CLEAN-UP SOLVENT: BOYSEN® Paint Thinner B-0340
PACKAGING: 1-Liter, 4-Liters, and 16-Liters
APPLICATION: By brush or roller
|
|
DESCRIPTION: BOYSEN® Red Oxide Metal Primer is an alkyd-based, rust inhibiting primer for steel and iron surfaces. It works exceptionally well for industries where there is an immediate need to prolong the life of metal products.
PRINCIPAL USES: As primer for exterior and interior steel.
DRY TIME:
Touch: 2 hours
Recoat: 12 hours
THEORETICAL COVERAGE PER 4-LITERS: 25 - 30 sq. m.
*Depending on surface texture and porosity
TINTING: Not applicable
THINNING SOLVENT: Thin with not more than 1- Liter of BOYSEN® Paint Thinner B-0340 per 4- Liter can of BOYSEN® alkyd enamel products.
CLEAN-UP SOLVENT: BOYSEN® Paint Thinner B-0340
PACKAGING: 1-Liter, 4-Liters, and 16-Liters
APPLICATION: By brush or roller
|
|
SURFACE PREPARATION:
Wipe the surface with a rag soaked in paint thinner to remove grease, oil, wax and other foreign matter. For new galvanized surfaces, you may opt to etch the surface by applying 10% BOYSEN® Metal Etching Solution B-71 (Dilute 1 part of B-71 to 9 parts water). Rinse with water and dry immediately.
Unpainted galvanized surfaces that have been exposed for 6 months or more need not be etched.
For recoating pre-painted galvanized surfaces in good condition, sand lightly then wipe the surface with a clean rag before applying paint. Remove all loose paint film to sound surface. Spot prime bare substrate.
For corroded galvanized surfaces, remove rust by wire brushing and use BOYSEN® Metal Etching Solution B-71. Let it stay for 10-15 minutes. Be sure to remove all remaining residue. Immediately prime after drying.
PAINTING SCHEDULE:
Metal Surfaces
Primer: BOYSEN® Red Oxide Metal Primer B-310
2nd & 3rd coat: BOYSEN® Quick Drying Enamel or BOYSEN® Cool Shades™ or BOYSEN® Roofgard™
|
